technical Specifications :
| Diameters | 4.8 meter, 5.4 meter, 6 meter, 7.2 meter |
| Blades Material | Aero Propeller Metal |
| Blades Finish | Mill-Finish standard, Anodized Coated |
| #Of Blades | 6-8 |
| CFM | Up-to 428,000 (24' diameter, 4 blade) |
| Motors | 1.5 Hp - 2.0 Hp |
| Voltages | 220,380 |
| Phase | 1 or 3 |
| Amps | 3.2A @480V |
| Watts | 1000-1500 |
| Frequency | 50 Hz |
| Coverage | Up to 22,000 sq ft 85′ from the fan’s center in all directions |
| Decibels | < 40 to 60 dB depending on fan speed (measured 20′ below and 20′) from the fan’s center |
| Air Speed | Up to 7 mph at full speed |
| Central | Variable Speed |
| Mounting Heights | 15′ to 80′ form finished floor to bottom of blade |
| Weights | 300lbs |
HVLS Fans Slowly circulate a large amount of air in a very large space. Air is pulled from above the fan and pushed down in a conical shape the floor below. air travels in this cone shape until it hits the floor and then moves in a horizontal stream away from the diameter of the fan.
- High – quality precision motor
- The world brand inverter control system
- Automatic fault alarm device
- Anti fall safety device linkage
- The shaft locking device disk
- The blade anti-fracture protection device